MPAMCFG_MBW_MAX MPAM Memory Bandwidth Maximum Partition Configuration Register The power domain of MPAMCFG_MBW_MAX is IMPLEMENTATION DEFINED when (FEAT_MPAMv0p1 is implemented or FEAT_MPAMv1p0 is implemented), MPAMF_IDR.HAS_MBW_PART == '1', and MPAMF_MBW_IDR.HAS_MAX == '1' MPAM MPAMF_BASE_s 0x0208 MPAMCFG_MBW_MAX_s When FEAT_MPAMv1p0 is implemented or FEAT_MPAMv0p1 is implemented RW MPAM MPAMF_BASE_ns 0x0208 MPAMCFG_MBW_MAX_ns When FEAT_MPAMv1p0 is implemented or FEAT_MPAMv0p1 is implemented RW MPAM MPAMF_BASE_rt 0x0208 MPAMCFG_MBW_MAX_rt When FEAT_RME is implemented and (FEAT_MPAMv1p0 is implemented or FEAT_MPAMv0p1 is implemented) RW MPAM MPAMF_BASE_rl 0x0208 MPAMCFG_MBW_MAX_rl When FEAT_RME is implemented and (FEAT_MPAMv1p0 is implemented or FEAT_MPAMv0p1 is implemented) RW MPAMCFG_MBW_MAX is a 32-bit read/write register that controls the maximum fraction of memory bandwidth that the PARTID selected by MPAMCFG_PART_SEL is permitted to use. A PARTID that has used more than MAX is given no access to additional bandwidth if HARDLIM == 1 or is given additional bandwidth only if there are no requests from PARTIDs that have not exceeded their MAX if HARDLIM == 0. MPAM If MPAMF_IDR.HAS_RIS is 1, the control settings accessed are those of the resource instance currently selected by MPAMCFG_PART_SEL.RIS and the PARTID selected by MPAMCFG_PART_SEL.PARTID_SEL. If FEAT_MPAMv0p1 or FEAT_MPAMv1p0 is implemented, then the following statements apply: MPAMCFG_MBW_MAX_s controls maximum bandwidth for the Secure PARTID selected by the Secure instance of MPAMCFG_PART_SEL. MPAMCFG_MBW_MAX_ns controls the maximum bandwidth for the Non-secure PARTID selected by the Non-secure instance of MPAMCFG_PART_SEL. If FEAT_RME is implemented, then the following statements also apply: MPAMCFG_MBW_MAX_rt controls the maximum bandwidth for the Root PARTID selected by the Root instance of MPAMCFG_PART_SEL. MPAMCFG_MBW_MAX_rl controls the maximum bandwidth for the Realm PARTID selected by the Realm instance of MPAMCFG_PART_SEL. The power and reset domain of each MSC component is specific to that component. MPAMCFG_MBW_MAX is a 32-bit register. HARDLIM 31 31 31 Maximum bandwidth limit behavior selection. 0b0 Soft limit: when MAX bandwidth is exceeded, the partition contends with a low preference for downstream bandwidth beyond MAX. 0b1 Hard limit: when MAX bandwidth is exceeded, the partition does not use any more bandwidth until the memory bandwidth measurement for the partition falls below MAX. When MPAMF_MBW_IDR.MAX_LIM == '00' RW When MPAMF_MBW_IDR.MAX_LIM == '01' RAZ/WI When MPAMF_MBW_IDR.MAX_LIM == '10' RAO/WI 30 16 30:16 Reserved, RES0. MAX 15 0 15:0 Memory maximum bandwidth allocated to the partition selected by MPAMCFG_PART_SEL. MAX is in fixed-point fraction format. The fraction represents the portion of the total memory bandwidth capacity through the controlled component that the PARTID is permitted to allocate. The implemented width of the fixed-point fraction is given in MPAMF_MBW_IDR.BWA_WD. Unimplemented bits are RAZ/WI. The implemented bits of the MAX field are always to the left of the field. For example, if BWA_WD = 3, the implemented bits are MPAMCFG_MBW_MAX[15:13] and MPAMCFG_MBW_MAX[12:0] are unimplemented. The fixed-point fraction MAX is less than 1. The implied binary point is between bits 15 and 16. In an implementation with w implemented bits, the largest fraction of the bandwidth that can be represented is 1- (0.5)^w. If both FEAT_MPAM and FEAT_RME are implemented, the following statements apply: In a system that supports Secure, Non-secure, Root, and Realm memory maps, there must be MPAM feature pages in all four address maps: MPAMCFG_MBW_MAX_s must only be accessible from the Secure MPAM feature page. MPAMCFG_MBW_MAX_ns must only be accessible from the Non-secure MPAM feature page. MPAMCFG_MBW_MAX_rt must only be accessible from the Root MPAM feature page. MPAMCFG_MBW_MAX_rl must only be accessible from the Realm MPAM feature page. MPAMCFG_MBW_MAX_s, MPAMCFG_MBW_MAX_ns, MPAMCFG_MBW_MAX_rt, and MPAMCFG_MBW_MAX_rl must be separate registers: The Secure instance (MPAMCFG_MBW_MAX_s) accesses the memory maximum bandwidth partitioning used for Secure PARTIDs. The Non-secure instance (MPAMCFG_MBW_MAX_ns) accesses the memory maximum bandwidth partitioning used for Non-secure PARTIDs. The Root instance (MPAMCFG_MBW_MAX_rt) accesses the memory maximum bandwidth partitioning used for Root PARTIDs. The Realm instance (MPAMCFG_MBW_MAX_rl) accesses the memory maximum bandwidth partitioning used for Realm PARTIDs. When RIS is implemented, loads and stores to MPAMCFG_MBW_MAX access the memory maximum bandwidth partitioning configuration settings for the bandwidth resource instance selected by MPAMCFG_PART_SEL.RIS and the PARTID selected by MPAMCFG_PART_SEL.PARTID_SEL. When RIS is not implemented, loads and stores to MPAMCFG_MBW_MAX access the memory maximum bandwidth partitioning configuration settings for the PARTID selected by MPAMCFG_PART_SEL.PARTID_SEL. When PARTID narrowing is implemented, loads and stores to MPAMCFG_MBW_MAX access the memory maximum bandwidth partitioning configuration settings for the internal PARTID selected by MPAMCFG_PART_SEL.PARTID_SEL, and MPAMCFG_PART_SEL.INTERNAL must be 1. When PARTID narrowing is not implemented, loads and stores to MPAMCFG_MBW_MAX access the memory maximum bandwidth partitioning configuration settings for the request PARTID selected by MPAMCFG_PART_SEL.PARTID_SEL, and MPAMCFG_PART_SEL.INTERNAL must be 0. 2026-03-26 20:27:25 2026-03_rel